Template-free synthesis of novel Co3O4 micro-bundles assembled with flakes for high-performance hybrid supercapacitors

In this paper, a novel Co₃O₄ micro-bundles structure (Co₃O₄ MBs) was obtained at 120 °C after a hydrothermal reaction for 24 h and followed by an annealing treatment at 300 °C in air. The unique Co₃O₄ MBs are constructed by many adjacent flakes with 0.4 μm in thickness, and exhibit a large surface area of 81.2 m² g^?1 and a mean pore diameter of 6.14 nm, which may facilitate a sufficient contact with electrolyte and then shorten the diffusion pathway of ions. A remarkable electrochemical behavior including specific capacity of 282.3 C g^?1 at 1 A g^?1 and 205.9 C g^?1 at 10 A g^?1, and an excellent cycling performance with 74.6% capacity retention after 4000 charge-discharge process at 5 A g^?1 are achieved when the test of Co₃O₄ MBs-modified electrode is performed using three-electrode configuration. Additionally, a hybrid supercapacitor (HSC) was fabricated with the obtained Co₃O₄ MBs as positive electrode and commercial activated carbon (AC) as negative electrode. The HSC exhibits a specific capacity of 144.1 C g^?1 at 1 A g^?1 and 126.4% capacity retention after 5000 cycles at 5 A g^?1. An energy density of 38.5 W h kg^?1 can be obtained at a power density of 962.0 W kg^?1, and 29.5 W h kg^?1 is still retained at 8532.5 W kg^?1. The simple synthetic strategy can be applicable to the synthesis of other transition metal oxides with superior electrochemical performance.     

The corrosion behavior and mechanism of X65 steel induced by iron‐oxidizing bacteria in the seawater environment

The corrosion behavior and mechanism of iron‐oxidizing bacteria (IOB) on X65 steel in seawater are studied. This study uses the methods of weight loss, electrochemical measurements, and surface analysis. The results show that the IOB increases the corrosion damage degree of steel. Pittings are observed in the medium with IOB. The potentiodynamic polarization curves show that the anodic reaction rate is accelerated in the corrosion process of IOB. The synergies in corrosion between the metal surface, abiotic corrosion products, and bacterial cells, and the pitting corrosion mechanism of X65 steel are discussed.     

Weighted power means of q-rung orthopair fuzzy information and their applications in multiattribute decision making

Weighted power means with weights and exponents serving as their parameters are generalizations of arithmetic means. Taking into account decision makers' flexibility in decision making, each attribute value is usually expressed by a $q$-rung orthopair fuzzy value ($q$-ROFV, $q\ge 1$), where the former indicates the support for membership, the latter support against membership, and the sum of their $q$th powers is bounded by one. In this paper, we propose the weighted power means of $q$-rung orthopair fuzzy values to enrich and flourish aggregations on $q$-ROFVs. First, the $q$-rung orthopair fuzzy weighted power mean operator is presented, and its boundedness is precisely characterized in terms of the power exponent. Then, the $q$-rung orthopair fuzzy ordered weighted power mean operator is introduced, and some of its fundamental properties are investigated in detail. Finally, a novel multiattribute decision making method is explored based on developed operators under the $q$-rung orthopair fuzzy environment. A numerical example is given to illustrate the feasibility and validity of the proposed approach, and it is shown that the power exponent is an index suggesting the degree of the optimism of decision makers.     

微量Zr对不对称轧制Al-0.8Mg-0.9Si合金板织构及性能的影响

本文研究了微量Zr对不对称轧制Al-0.8Mg-0.9Si合金板及其相继固溶处理后的微观结构及性能的影响。结果表明：微量Zr在Al-0.8Mg-0.9Si合金中形成Al3Zr相弥散分布在基体中,在不对称轧制过程中,该化合物相对Copper{112}<111>、Brass{011}<211>、S{123}<634>、E{111}<110>和F{111}<112>等形变织构无明显影响；在随后的固溶处理过程中,轧制板材发生的再结晶使得Copper、Brass、S等形变织构的取向密度降低,但不溶的细小Al3Zr相在一定程度上抑制了不连续再结晶行为,反而使轧制过程中形成的E、F剪切织构的取向密度增加。添加微量Zr所形成的上述结构使该合金板材在固溶后获得较好的综合性能,其抗拉强度、屈强比和延伸率分别可达230MPa、0.49和9.5%以上；塑性应变比r值从0.7提高至0.84,杯突值IE由8.94提高至9.84,各向异性度|Δr|由0.15降低至0.04。     

Electrocatalytic activity of LaSr3Fe3O10 and LaSr3Fe3O10-GO towards oxygen reduction reaction in alkaline medium

Oxygen reduction reaction(ORR) plays a critical role in many energy conversion and storage processes.Therein, a comparative study of the electrocatalytic activity for ORR in 0.1 mol/L KOH solution was conducted using layered perovskite-like LaSr_3 Fe_3 O_(10) and LaSr3 Fe_3 O_(10)-graphene oxide(GO) composite as electrodes. Linear sweep voltammetry(LSV) results show that the LaSr3 Fe_3 O_(10)-GO hybrid exhibits higher current density, a more positive onset potential(-0.15 V vs. Hg/HgO) in comparison with LaSr_3 Fe_3 O_(10).The value of the overall transferred electrons for both catalysts implies a dominant two electron process for ORR. Both catalysts under alkalic conditions exhibit a two-step Tafel slope, suggesting a change in the reaction mechanism for ORR. The composite electrode exhibits a higher ORR current density, but inferior durability performances in relative to the LaSr_3 Fe_3 O_(10) electrode.     

Beam and image experiment of beam deflection electron gun for distributed X-ray sources

Distributed X-ray sources comprise a single vacuum chamber containing multiple X-ray sources that are triggered and emit X-rays at a specific time and location. This process facilitates an application for innovative system concepts in X-ray and computer tomography. This paper proposes a novel electron beam focusing, shaping,and deflection electron gun for distributed X-ray sources.The electron gun uses a dispenser cathode as an electron emitter, a mesh grid to control emission current, and two electrostatic lenses for beam shaping, focusing, and deflection. Novel focusing and deflecting electrodes were designed to increase the number of focal spots in the distributed source. Two identical half-rectangle opening electrodes are controlled by adjusting the potential of the two electrodes to control the electron beam trajectory, and then, multifocal spots are obtained on the anode target. The electron gun can increase the spatial density of the distributed X-ray sources, thereby improving the image quality. The beam experimental results show that the focal spot sizes of the deflected(deflected amplitude 10.5 mm)and non-deflected electron beams at full width at half maximum are 0.80 mm 90.50 mm and 0.55 mm 90.40 mm, respectively(anode voltage 160 kV; beam current 30 mA). The imaging experimental results demonstrate the excellent spatial resolution and time resolution of an imaging system built with the sources, which has an excellent imaging effect on a field-programmable gate array chip and a rotating metal disk.     

适用于“一步酸溶法”生产氧化铝工艺中稀释料浆的高分子絮凝剂的合成

为达到"一步酸溶法"生产氧化铝工艺中稀释料浆在高温、高酸度工况下进行固液高效分离的目的,以丙烯酰胺(AM)与阳离子(DMDAAC)为共聚单体,通过水溶液聚合法合成了阳离子聚丙烯酰胺(CPAM)絮凝剂。以转化率和相对分子质量为目标,通过单因素分析法确定了最优的合成工艺条件,即反应温度30℃,单体总质量分数为30%,阳离子度5%,K2S2O8和NaHSO3质量分数均为0.005%,2,2′-偶氮二(2-脒基丙烷盐酸盐)(V50)质量分数为0.0025%,乙二胺四乙酸(EDTA)质量分数为0.05%的条件下,反应时间为6 h,获得相对分子质量为1.2×107溶解性能较好的阳离子型聚丙烯酰胺(CPAM)。